In 2019, an extraordinary pavilion was constructed in Diemersteiner Tal near Kaiserslautern (Germany). The structure is constructed entirely out of timber and did not require any metal fasteners.
The pavilion is located at the Technical University of Kaiserslautern Architecture Faculty’s new timber research campus. The structure serves as the building entrance.
The structural analysis and design for this unique and one-of-a-kind building was carried out by PIRMIN JUNG. For the cross-laminated timber (CLT) surface design as well as the connections, the engineers of PIRMIN JUNG used the finite element program RFEM. The Digital Timber Construction DTC research group at the Technical University of Kaiserslautern was headed by Jun. Prof Dr. Christopher Robeller. This group developed a software to manufacture light timber CLT panel structures.
The wooden pavilion is approximately 13 ft high and spans over 39 ft. Three large arched wings stem from the domed roof and connect to the foundation. The shell structure consists of 3.94 in. thick CLT panels. Because the components are subjected to little bending and rather mainly to compression, fewer materials were required.
The pentagonal to heptagonal arch components required a mathematical algorithm. More than 200 unique geometrical surfaces about 24 in. in width were created through computer calculations. These small components were manufactured from scrap pieces typically deemed as waste during the production of multi-story building wall elements.福艳之都市后宫在线观看 福艳之都市后宫无删减 琪琪 福艳之都市后宫在线观看 福艳之都市后宫无删减 琪琪 ,国偷自产短视频中文版在线观看 国偷自产短视频中文版无删 国偷自产短视频中文版在线观看 国偷自产短视频中文版无删 ,父爱如山全集动漫资源在线观看 父爱如山全集动漫资源无删 父爱如山全集动漫资源在线观看 父爱如山全集动漫资源无删
The adjacent panels are connected with glued-in beech dowels and X-fix connectors, which are plywood dovetail-shaped timber-to-timber connectors. The X-fix connectors resist the tension and shear forces resulting from the adjacent in-plane surface displacement. They also ensure a gap-free connection for the panels during assembly. The glued in beech dowels fix the plates and transfer the transverse forces acting perpendicular to the plates.
The entire project was completed in eight weeks short weeks including from the initial planning to the final construction. The production and assembly itself took only eight days. Load tests using six OSB panels with a 4.59 ft height (corresponding to a weight of about 17 tons) were able to verify the dome’s mathematically proven high load-bearing capacity after having completed the construction.
Do you have questions or need advice?
Contact our free e-mail, chat, or forum support or find various suggested solutions and useful tips on our FAQ page.
Programs Used for Structural Analysis
Structural engineering software for finite element analysis (FEA) of planar and spatial structural systems consisting of plates, walls, shells, members (beams), solids and contact elements
Timber design according to Eurocode 5, SIA 265 and/or DIN 1052
Stability analysis according to the eigenvalue method
Generation of equivalent geometric imperfections and pre-deformed initial structures for nonlinear calculations